beading, beadwork, glass beads, jewelry design, seed beads


I wanted to write this last night, but by the time I was willing to call it quits, it was 2:30 AM. Also, as I have an unofficial policy of not taking photos of my work after sundown…sleep was preferable to staying up further into the early morning. I’ve had severe problems with sleep dysregulation before, and I have responsibilities, so taking care of myself has to come in sometime (even if I’m hyper-focused!).

Last night, I learned a number of things…the largest of which, relates to my preferred color schemes…the second largest of which, encompassed two rules:

  1. Don’t tie off a macramé pattern directly to a clasp, or you get the disadvantage of built-in stiffness on the connection. Tying off to a metal ring, then attaching the ring to another ring, alleviates the stress on that join.
  2. Don’t cut the excess cord off of knots before sealing those knots, first. Otherwise, your knots will unravel and your work will start to fall apart (at the very end!).

Today, I’ve basically been working all day at making jewelry. My folks call it a, “hobby,” moreso than a, “side hustle.” Is a hobby this serious? I don’t know.

About the color combinations…I’ve found that I want to stay away from monochromatic color schemes. This was surprising. In the past — as a youth, I had been much more hesitant about using color, so it would be more likely for me to stick with blues and greys. Hematite (an iron ore) was a particular favorite material, as it easily integrates with silver, has a nice weight and heft, plus a gunmetal metallic luster, and has been relatively inexpensive (for a natural stone).

It was relatively amazing that I was able to figure out the optimal pattern for this bracelet and write it down and then follow it. When I look at the knotting pattern on the sample I was working out initially, I can see it was trial-and-error; all over the place. I had to unravel a good amount of the work I did when I first started yesterday. This is because reversing the three-knot pattern (which reverses between every bead) essentially messes up the spacing of the beads.

Although I’ve made it to the point where I use some colors more enthusiastically than others, I also have certain hues that I am more attracted to, than others. Looking at my little bead palette things, which I’ve posted about before on this blog (scroll down), I see a lot of warm blues, greens, and violets, ranging into violet-pink…not so many yellows or oranges — or the browns that I intensely want to use. I already know that I’m not even trying to use reds, because reds are generally so intense that they overpower everything else. Pinks are also difficult to use, because of the fact that they are often either dyed (thus possibly not lightfast), or because they tend to be extremely pale.

The first trial version of this bracelet style, I made in a color palette extremely similar to the one above, but I used Capri Blue and Capri Blue Silverlined (S/L) for two of the three 6/0 bead colors that I used. The second trial bracelet (above) used Transparent Emerald (a blue-leaning green) in place of the Capri Blue S/L, and because of the lack of silver lining in the bead hole, the green falls back much more and becomes very subtle.

I’m planning to remake the first trial. I basically ruined it by cutting the threads before sealing the knots, which caused the piece to begin to unravel. I also tied it directly to the clasp, which I shouldn’t have done. I have three options:

  1. Wear the bracelet until it randomly falls apart and then remake it
  2. Cut the bracelet apart and re-knot it properly
  3. Buy another string of 4mm green iris fire-polished Czech rounds, give up the extra gold-luster 8/0s, and make a duplicate.

Although S/L beads are eye-catching in the store, they can overpower a piece if used indiscriminately. When I was a youth, I would use a lot of these, and so maybe it’s this that causes me to look at some bead combinations and think that they look like something I would have made at 16 years old.

I’ve also found that I have a tendency to like luster beads, especially Gold Luster; that opaque beads are much more useful than I would expect, advancing in compositions; that matte beads are welcome contrasts to metallic and glossy beads; that iris beads can be the foundation of a piece; and that transparent beads often fall back in a piece, while S/Ls advance.

Cobalt Blue is also extremely difficult for me to use, on par with red, because of its intensity and nearness to violet.

On top of all this, I find myself hesitant to use dyed and color-lined beads, because I’m pretty sure they’re categorically susceptible to fading (even though many colors cannot be made without these options).

I need to keep a journal on this information, including information about knotting patterns. Right now, my design notes are on temporary papers. I need to do something better.

There’s more I have to say — in regard to using SuperDuos and MiniDuos — but it will have to wait for another night. I’ve worked out two more swatches of a pattern than my initial two so far, using a double-needle technique which is much easier than I predicted (with the main issues being accidental loops, and going through the right piercings in the right directions). The third and fourth iterations (using Magatamas, Fringe beads, and Demi Round and O-beads) are very interesting, but I don’t have photos, right now.

What I can say is that for some reason, beadweaving is less stressful for me than micro-macramé, likely because I’m abrading my hands less (even though I did give myself a pretty nasty scratch by storing a needle in the fabric of my pants)…

beading, beadweaving, beadwork, craft, glass beads, organization, seed beads

Reminders of the pleasures of life – 01

I have photos of my new storage system today, as I wanted to do something which wasn’t…academic, anymore. I have also been looking around at retailers, online.

I know certain things I need for at least one project, but right now I’m trying to figure out from whom to get them. Factoring into that is the selection the retailer carries, and what extra things they carry that I won’t be able to source elsewhere.

Also, a detractor is the fact that some bead retailers do not say which company manufactures a specific color or finish of bead. Fortunately or not, at least one of these companies has the widest selection of rocaille (round) seed beads I have ever seen. That’s great in terms of selection, not so great in terms of design.

I’ve also bought from this vendor, before, and there is the question of whether the manufacturer even matters, if I was okay prior without knowing the manufacturer (when buying from a local bead store), and if I’m okay with swapping out bead colors just because of those beads’ dimensions.

The size 6/0 rocailles that I’m most likely to use (Czech and Japanese)

Above is a photo of what I’m most likely to use in size 6° (also alternately notated, 6/0, which you may start seeing me use if I get tired of the “°” special character. I should probably just memorize the ASCII code). Most of them should be sourced from the Czech Republic, but some of the newer ones are Miyuki brand — which, I’ve noticed, don’t quite appeal as well to me, aesthetically speaking. They’re just more rectangular and less oval, in profile.

I’m thinking that it’s not as great for RAW (Right-Angle Weave), where the beads need to nest together. I question how they would look in Herringbone stitch, as well…but the most practical way to find out, is to try.

I also have two vials which I know are Toho 6°s, which are the light pink silverlined (upper right corner of the above photo), and Silver Galvanized (that isn’t in these photos). They appear closer to Miyukis than to the Czech 6°s (a characteristic example of which are those apple-green rounds, bottom row, third from the left).

For scale, each of these little containers is about 1″ in diameter.

Size 8/0 seed beads. Same size containers.

The photo right above, here, shows size 8° seed beads, slightly smaller than the size 6°. As the caption reads, the little containers are the same size. I’ve got to say that I’m happier with the color range I have in this size, even though you can see that I didn’t quite know how to organize them.

Both the size 8° and size 6° seed beads will easily fit onto the cord I use for micromacramé — I’ve heard that the brands of C-Lon and S-Lon are relatively interchangeable, though I just recently bought my first spool of S-Lon. (One of them — I won’t say which, just in case I’m wrong — is an off-brand of the other.)

Size 11/0 seed beads, same size container. (Japanese)

Most size 11° seed beads will also fit onto the regular size C-Lon cord, but it requires more work than using the size 8° or 6°. What I’ve done is paint the end of the cord with clear nail polish, then after it is dry, cut the tip at an angle to produce a self-needle stiff enough to pass through the bead holes.

Without doing this, you’re vulnerable to the end of the cord fraying, which will prevent it from being able to pass through this diameter bead hole (noting that the diameter of a bead hole, likely varies between brands). Of course, it’s possible just to cut a new tip…and let it fray again (I’ve been known to do this), but it’s kind of a lot of trouble.

It should go without saying that Czech bead sizing is different than Japanese bead sizing…but maybe that’s just because I’ve been doing this so long.

I’ve found places selling size 10° Czech beads, which — if my memory is right, should match up better to size 11° Japanese beads, than size 11° Czech seed beads (which are slightly smaller, and thus can’t be substituted one-for-one in a pattern utilizing Japanese seed beads). But I can’t really guarantee that. Most of my hanks of Czech seed beads haven’t been labeled as to size — I’ve just had to work out how to fit the different bead sizes together, on the fly. But looking at my collection now, it’s apparent that the shapes are different.

I have some beads which I believe are Czech silverlined light topaz 10°s — basically, transparent pale gold with foil on the inside of the bead hole. At the time I got them, I was still a high school student, and knew nothing about bead sizing — let alone that I should ask the vendor what size they were! This was also at a bead convention, and I don’t know at all, the company I would have bought them from.

Czech seed beads are more donut-shaped and flatter in profile than Japanese seed beads (which are more cylindrical), and they’re generally sold in a different form — that is, stranded and often in hanks (12 strands) or half-hanks (6 strands). Japanese seed beads, in contrast, are most often sold loose in vials, bags, or other plastic containers.

The reasoning behind selling beads in hanks is that it’s much easier to see uniformity in bead size and shape when the beads are stranded and you can compare them to each other.

I’ve just realized that I didn’t even make an effort to photograph my Czech hanks…I’ll have to get around to that, another day. What I can say, though, is that they’re no less beautiful than the Japanese seed beads…and they’re also a reason for me to have gotten the storage I have, so that I can store them loose (and thus, eventually, use them).

I should also note that sometimes size 6° and larger Czech seed beads are sold loose, like Japanese seed beads. I think this is more for convenience and consistency in packaging, than anything. It can discourage use to keep beads on hanks, as well…I know I’m tempted to avoid using them just because they’re so pretty on the hanks, but making something out of them, necessitates cutting them apart.

The below image is of Czech fire-polished round beads. These, in addition to “druks” (round solid glass beads), are essential if you’re going to be doing small-scale bead weaving. I’m pretty sure that the lower row is all 3mm beads; the rest are between 3mm and 6mm (the latter of which, I didn’t even realize I put in here).

Fire-polished rounds, from 3mm to 6mm.

Like I’ve mentioned somewhere (…?) else, 5mm fire-polished rounds are somewhat rare, but they do exist. More common are the 6mm fire-polished rounds, a couple of which are in the very top of this photo (the transparent green and transparent “amethyst”, fourth and fifth from the left). The deep blue between the two greens in the top row (third from the left) is a 5mm size.

Sizes commonly go up through 8, 10, and 12mm…but I’ve found the very large sizes much more useful for stringing and other stand-alone applications (e.g. earrings), than for beadweaving.

I mentioned “druks” earlier. It would be normal that most readers here won’t know what I mean by that, so I’ve taken another photo and cropped it to those druks…which are spherical glass beads.


The very small beads at the bottom of the above photo are 2mm glass “pearls” — I’m not sure if they are technically categorized as druks. They’re very useful for filling tiny spaces where the thread would otherwise be exposed and vulnerable to cuts and abrasions (which are generally the death of well-loved beadwork). The drawback is that all of them I’ve found are vulnerable to the coating on the outside, peeling.

An alternative is using the very small 2 or 3mm Swarovski crystals, which I’ve used before when playing with patterns from bead magazines. I’ve found that these beads only come in a limited number of colors. The edges of their holes are also sharper, so using these necessitates using a tough thread like FireLine, lest the thread be cut while you’re still weaving the thing!

I haven’t yet looked into Chinese crystal for alternatives, though it’s good to know that Swarovski isn’t the only option available.

To the left of the 2mm glass pearls, are “3mm” druks, actually closer to 2.5mm, on measurement. Above them are 3mm druks; the green and purple iris [iridescent] beads on the upper right, are also 3mm, when they were sold as 4mm. The sky blue matte beads in the center, along with the green glass “pearls”, are actually 4mm.

Anyhow, spherical glass beads which are drilled down the center are called “druks”, and they’re again essential if you’re doing tiny bead-weaving which requires technical precision. The fire-polished rounds (so-called because they’re cut and then allowed to melt again slightly, producing their glossy appearance, if memory serves) are also really nice for texture and contrast.

I’ve been able to use fire-polished rounds down to 3mm with C-Lon standard cord for micromacramé, as well.

I know this blog doesn’t have a lot of followers, so for now I’m just putting this here to remind myself that I don’t have to be on the computer writing and studying, all the time. It’s good to weave in some offline content. It’s also been good to do some image-editing…and step out of academic thought, for a while.