beading, beadweaving, Business, craft, creativity, jewelry design, self care

Well, I screwed that up. :)

I did work with my beads today (technically: yesterday), and have a new design and a fresh set of earrings, for it. My major dilemma is whether to show these on the blog, if I want to eventually sell online (which is looking like more of a likelihood, than not). Personal information, professional identity, and all that. I shouldn’t mix my personal blog with business.

The drawback to doing this, tonight: I got so involved in my work that I completely (as in, entirely) forgot to take my evening medication, so I may not be tired until 2:30 AM, or so. As I start this post, it’s a little before 1 AM.

This is the first design I’ve made, that’s layered. I rather like the look, but the major issue will be sourcing a couple of bead shapes, going forward — if I make these to sell, that is. There are a couple of shapes that I’m either having a difficult time sourcing, or my best supplier is on the other side of the globe, and shipping takes 3 weeks in international mail.

Actually — now that I changed my search terms — I’m finding them. I need to look under “drop bead” instead of “teardrop bead”. One of the weaknesses of Web searching is the lack of a consistent vocabulary. The names of beads aren’t an issue in a brick-and-mortar store, where you can see the things…but, well, then there are text-based search engines.

I’ll go to bed now, so I can work on this more, tomorrow. I’m not sure whether I’ll actually need to write a pattern for myself (or at least, take notes and make drawings)…I just find it odd, that I’d come out of the night with three working earrings (of my own design).

That is — I can do this, and maybe should do this. I mean…I’m apparently good at it. I just have to make time for myself to do it, and stop berating myself for taking a less efficient path to sustainability…

beading, craft, design, fiber arts, jewelry design, macrame

Woo! An all-nighter!

Last night was the first night in a long time that I got no sleep. Like, absolutely zero sleep. Don’t drink a Coke at dinnertime when you only got up a minute ago.

As is often the case, however: while I was unable to sleep, my mind was working. I puzzled out a new earring design (or designs), or the beginning of some. By dawn, I had pretty much had it with lying around in bed trying in vain to pass out, so I got up, sorted through the fabric laid out over the chair contemplatively (I haven’t made any masks since I burned myself with steam from the iron about three days ago), and then set to trying to make the earring I had designed.

As I had only essentially learned how to tie vertical and horizontal clove hitches (a.k.a. double half-hitches) a couple of days ago, it was kind of wondrous that I was able to transfer that to a chevron pattern. There are instructions for tying chevrons, Cavandoli-style, in Micro-Macramé Jewelry, but I did kind of have to puzzle out some things in construction. I’m pretty sure I won’t be following project instructions exactly, going forward. After all…they’re guides, and many more possibilities exist than are apparent from instructions.

An unfinished earring featuring a purple and orange panel of Cavandoli knotting, suspended from brass wire and terminated in beads.

Right now, the earring design still isn’t really complete. I’m trying to figure out what to do as a termination, given that M was in love with the piece with all the threads still attached to it.

On top of that, I’m not too happy about the color scheme, but considering this was a trial, I used colors that I normally would not use, in order to save the good stuff for the time at which I know what I’m doing. :) Unfortunately, then, this earring turned out almost looking like the wearer is a Lakers fan…and that’s about all I know about the Lakers. :)

However! For something I designed in the middle of the night and made on the fly in early morning, it turned out pretty well! At this point, I’ve knotted off the 4mm Fire-Polished bead at the bottom; all it’s waiting for, now, is cement, trimming, and possibly switching out that round earwire (inferred by the shadow at the top of the image).

I…could get into how I designed this, but…I’m not sure I have the energy to explain it, right now. I have set aside a notebook for jewelry design, which I should copy my drawings into; there were just so many design phases for this, however (incorporating macramé and wirework)…that the idea of the task is daunting.

This is a prototype, though, using C-Lon standard gauge. I’m hoping to make more of these, in more attractive colors. :)

jewelry, metalsmithing, self care

18g earrings back in. Reconsidering metalsmithing. Procrastination or overwork (I’m not sure which).

Not much of note has happened in my life, recently. I did, last night, put in my 18 gauge earrings, which are basically circles of surgical steel wire. Because they’re so thin, they tend to deform rather than accept the (tiny) bead that is supposed to help them close. I realized last night that I didn’t actually need the bead for something this small, and just threaded them in and pinched them so that they wouldn’t fall out. I should have about six weeks before I know for a fact that I can increase the gauge. So I can go up to 16g on the 25th of August, or later; assuming I don’t take the 18g rings out, until then.

A long time ago, I did think it was OK to “gauge up” early (given that I’ve gone up and down in gauge ever since I was first pierced), but at this point I’m more reserved about it. For some reason, the piercings aren’t at the same level of looseness or tightness all the time…sometimes a scar will tighten for no foreseeable reason. When that happens, the piercing is fragile and vulnerable to microtears, which can lead to oozing or bleeding. That can further damage the piercing, if shards of dried fluid are pulled through when the ring is loosened. The last time that happened to me, I realized I had to take the larger wire out and put in a thinner one, so I wouldn’t inadvertently heal in a deformation. Then I had to wait for the piercing to heal sufficiently.

I’ve read to treat an expanded piercing just like a new one, but I think (at this point) that these two states aren’t exactly the same. If I had, for example, soaked the piercing in salt water twice a day before attempting to loosen the ring (as is recommended for fresh piercings, though that’s not medical advice), I wouldn’t have dragged dried blood through a tender site (which caused the pain that caused me to realize I had a microtear. I’m still not sure, however, whether it tore before and I didn’t notice it, or whether it tore when I felt the pain). Having had the piercings the first time was not really similar to letting them shrink down, and then re-opening them later. Had I not started at 14g (and then never gone above that), gauging up really might have been more similar to having a new piercing.

Also, the piercings I’m talking about are just basic earlobe piercings, not cartilage or body-type things. Because it’s easy for employers here to discriminate in hiring based on the number of piercings they can see on a person…there are reasons not to have too many.

Yesterday, I had the chance to wear earrings with standard posts, again: they were basically studs shaped like flowers. I had the misfortune of almost losing one…which meant that I had to pick up an earnut off the floor, then wash my hands, then wash my ear, then wash the earring…though the positive thing is, I realized I wasn’t too attached to it.

In contrast…my biggest hesitation about expanding my piercings has had to do with commitment. As for why it is that I keep taking my larger-gauge jewelry out, I think it has been because I wanted to wear the jewelry I had made before, which mostly has earwires between 22g and 18g. I also haven’t wanted my piercings to migrate because of using too fine a gauge in too large a piercing (though I’m not sure that would even happen). There’s nothing else I can think of which would be a reason.

It would probably be an easier decision for me if I were not a beadworker. To make jewelry for large-gauge piercings, I would basically need to move into metalsmithing. It’s not like it would be difficult, at least to make something like a ring, or a tunnel or plug (if I could find safe silicone o-rings). However…if I were to make anything more major, I’d be dealing with forging, and I’m not sure I have a torch strong enough to work with thick, solid metal.

I also only have the ability right now to work in silver, brass, or copper; most of the large-gauge jewelry I have, in contrast, is surgical steel. Moving into that means moving into blacksmithing. The addition of iron makes the process of forging…different. And I don’t know how to do it.

However, there are at least two or three local places that I know of (Silvera Jewelry School, the Richmond Art Center, and The Crucible), in which I could use more powerful torches than I have access to, here. I would basically have to drop into a lab, though.

Or, I could just resign myself (for now), to buying earrings, and using beadwork skills for necklaces and bracelets or anklets.

Not that I’ve made much jewelry at all, recently; I’ve been focused on lace. It is trying to devote time to this, however, where I have other things to be doing (for now), which are more important: like preparing for job interviews or searching for openings or building my LinkedIn account. However…the difficulty I’m having in taking time out for myself, somewhat indicates to me that I need to do it. I opted to write here tonight, instead of working on the lace…because for some reason (having been an English major) it seems less of a waste of time to write a blog post than it is to knot lace.

I know I could be working on my course, but the internet has been in and out all day. Besides…I’m getting tired of these courses, especially since I realize now that Cataloging is difficult for me. I know I probably should be working on my current course (or checking work in my past courses), but the thing is, “should” is a word that I’ve been trying to work out of my system, since I realized how much it was damaging me as a youth. (I was a severe overachiever, although that may be why I’m in the position I am [in regard to career prospects, and my relative lack of development in non-academic areas], now.)

Yeah, maybe I do need to stop working as hard as I can, as much as I can, just because I have a commitment or because I always expect more of myself. It’s interesting to take a vacation and then get back to work, and realize how much you appreciated not having to do it…

I also want to get back to my JavaScript course. How badly I want to get back to it? I’m not sure at this point. But I also want to get back to just basic coding. I just need to find something to build a site around…and, for now, to find the time to keep educating myself via the one serious book I’ve recently purchased. The reason I haven’t gotten back to it…is largely because I’m anxious about installing new programs on my machine. It’s always a risk, and usually a risk I don’t like to take. I do have ways of checking things; the entire process is just stressful.