Always. More. I was just looking through the (sparse) image logs I have on my current machine. I also have about 30 gigs of images archived on a memory stick. Most of it is from the community-college Art program. I’ll likely want to note which classes I was taking, when; that information is not in the same place.
What I’ve been advised to do is to copy all of my image storage onto my hard drive, then deal with it from there. It sounds like a good plan, especially as I’ve learned that, “save it and forget it,” is overly optimistic. (Backups can fail, that is.)
Today, I’ve mostly been dealing with face masks. I have 21 cuts of pre-shrunk, ironed batik for the outer portions (which I may have overdone); right now I’m picking out which Kona cottons to use on the backs, and what fabric to use for the ties. I have a lot of light-to-midweight quilting cotton which should be great for ties…but I don’t know how many I’ll get out of one Fat Quarter. All it takes to figure it out, though, is measurement and a little math.
Anyhow, there is not going to be a shortage of masks, here. I can see why people say they get burned-out on them; they can get really repetitive, at least unless I refine the design on each iteration. The latter keeps things interesting, but I can also see just wanting to get through them, as they’re needed almost immediately. The ones we need to send out, we can send out; I have a plan to replace them (plus), now. I just don’t want to send the ones I know are fragile…I can fix them, I don’t know if others can.
Not to mention that there is the stress of what to do when I run out of fabric, or thread. It may not have been the smartest thing to do, but that’s why I cut up the entirety of the batik Fat Quarters. It stops me from guessing, and lets me know what I do have. (The batiks are supposed to be good for filtering, so there are some on the outside of almost all of my masks.)
I also have more batik; it’s just more closely woven, more expensive, and in larger quantities. In other words: it’s nicer. :) But the higher quality does make it harder to sew, as it’s more resistant to the sewing machine (I’ve had the motor jam on me multiple times while trying to sew through too many layers of either the [tightly woven] good batik, or the [midweight] Kona cotton).
I also have quite a bit of soft, fine muslin, though that would likely go to ties, if it went to anything. I am not sure how effective it would be as a mask, even doubled. The reason to use it for ties is to avoid bumps of fabric at the corners of the masks (I have a sizable length of this which would allow one long tie instead of two short ones), though if I just moved in the corners of the ties a bit, I could probably take down a lot of that bulk.
Right now I do, actually, want to get back to work on the Nepali Blouse. It’s something I can do anytime, but I haven’t even wound the first bobbin, yet. We actually have more bobbins than I thought; I stalled because I thought there was only one empty one. Apparently, there are a bunch more empty bobbins, which just aren’t with the rest.
Right now I’m using Coats & Clark Dual Duty thread, which seems good enough (this is what I grew up with). The blouse, I got Gutermann thread for (it was a nice color match); but how old is it? I’m not sure — but if I look at my archives, it’s probably really old. I also don’t know how the fabric it’s made of, will sew…particularly, I’m not sure if I’ll have to use a different needle (or if I damaged the one that’s in there). I’m not quite advanced enough to know that, yet. M can help.
But tomorrow, I can wind the Gutermann bobbin, sew some scraps of the blouse material, and see how it comes out and if the needle needs changing. I’ve also just checked: I’ll need to make ties that are 2″ wide…unless I need to wrangle that a bit, in order to fit a multiple of 2 or 4 onto the Fat Quarter. Math, right?
The Internet (not my ruler, I haven’t checked) says the Fat Quarter should be 18″x22″. The 22″ is likely the length that I have lined up with the long side of the ruler (it has shrunk), which means the 18″ length is what I’m fitting 8 strips into, 2″ wide each: giving me 2″ of wiggle room and full ties for two masks.
That is what I’m talking about. Math.
I stopped work on this earlier tonight because I needed to think about what I was doing. It’s apparent, now, that I’ll end up using a lot more fabric for ties than I had predicted: however, it’s all (or, almost all) washed, dried, and ironed, now.
And I don’t have to make all 21 masks. :) However, I do have little cuts into the edges of some of these Fat Quarters. I’ll go and check on them now; I can easily swap out these lightweight things for uncut Fat Quarters, if I need to.
Just. Who knew that sewing would be such a useful skill (these days, at least)?