beading, beadweaving, beadwork, craft, glass beads, organization, seed beads

Reminders of the pleasures of life – 01

I have photos of my new storage system today, as I wanted to do something which wasn’t…academic, anymore. I have also been looking around at retailers, online.

I know certain things I need for at least one project, but right now I’m trying to figure out from whom to get them. Factoring into that is the selection the retailer carries, and what extra things they carry that I won’t be able to source elsewhere.

Also, a detractor is the fact that some bead retailers do not say which company manufactures a specific color or finish of bead. Fortunately or not, at least one of these companies has the widest selection of rocaille (round) seed beads I have ever seen. That’s great in terms of selection, not so great in terms of design.

I’ve also bought from this vendor, before, and there is the question of whether the manufacturer even matters, if I was okay prior without knowing the manufacturer (when buying from a local bead store), and if I’m okay with swapping out bead colors just because of those beads’ dimensions.

IMG_4100w
The size 6/0 rocailles that I’m most likely to use (Czech and Japanese)

Above is a photo of what I’m most likely to use in size 6° (also alternately notated, 6/0, which you may start seeing me use if I get tired of the “°” special character. I should probably just memorize the ASCII code). Most of them should be sourced from the Czech Republic, but some of the newer ones are Miyuki brand — which, I’ve noticed, don’t quite appeal as well to me, aesthetically speaking. They’re just more rectangular and less oval, in profile.

I’m thinking that it’s not as great for RAW (Right-Angle Weave), where the beads need to nest together. I question how they would look in Herringbone stitch, as well…but the most practical way to find out, is to try.

I also have two vials which I know are Toho 6°s, which are the light pink silverlined (upper right corner of the above photo), and Silver Galvanized (that isn’t in these photos). They appear closer to Miyukis than to the Czech 6°s (a characteristic example of which are those apple-green rounds, bottom row, third from the left).

For scale, each of these little containers is about 1″ in diameter.

IMG_4103w
Size 8/0 seed beads. Same size containers.

The photo right above, here, shows size 8° seed beads, slightly smaller than the size 6°. As the caption reads, the little containers are the same size. I’ve got to say that I’m happier with the color range I have in this size, even though you can see that I didn’t quite know how to organize them.

Both the size 8° and size 6° seed beads will easily fit onto the cord I use for micromacramé — I’ve heard that the brands of C-Lon and S-Lon are relatively interchangeable, though I just recently bought my first spool of S-Lon. (One of them — I won’t say which, just in case I’m wrong — is an off-brand of the other.)

IMG_4105w
Size 11/0 seed beads, same size container. (Japanese)

Most size 11° seed beads will also fit onto the regular size C-Lon cord, but it requires more work than using the size 8° or 6°. What I’ve done is paint the end of the cord with clear nail polish, then after it is dry, cut the tip at an angle to produce a self-needle stiff enough to pass through the bead holes.

Without doing this, you’re vulnerable to the end of the cord fraying, which will prevent it from being able to pass through this diameter bead hole (noting that the diameter of a bead hole, likely varies between brands). Of course, it’s possible just to cut a new tip…and let it fray again (I’ve been known to do this), but it’s kind of a lot of trouble.

It should go without saying that Czech bead sizing is different than Japanese bead sizing…but maybe that’s just because I’ve been doing this so long.

I’ve found places selling size 10° Czech beads, which — if my memory is right, should match up better to size 11° Japanese beads, than size 11° Czech seed beads (which are slightly smaller, and thus can’t be substituted one-for-one in a pattern utilizing Japanese seed beads). But I can’t really guarantee that. Most of my hanks of Czech seed beads haven’t been labeled as to size — I’ve just had to work out how to fit the different bead sizes together, on the fly. But looking at my collection now, it’s apparent that the shapes are different.

I have some beads which I believe are Czech silverlined light topaz 10°s — basically, transparent pale gold with foil on the inside of the bead hole. At the time I got them, I was still a high school student, and knew nothing about bead sizing — let alone that I should ask the vendor what size they were! This was also at a bead convention, and I don’t know at all, the company I would have bought them from.

Czech seed beads are more donut-shaped and flatter in profile than Japanese seed beads (which are more cylindrical), and they’re generally sold in a different form — that is, stranded and often in hanks (12 strands) or half-hanks (6 strands). Japanese seed beads, in contrast, are most often sold loose in vials, bags, or other plastic containers.

The reasoning behind selling beads in hanks is that it’s much easier to see uniformity in bead size and shape when the beads are stranded and you can compare them to each other.

I’ve just realized that I didn’t even make an effort to photograph my Czech hanks…I’ll have to get around to that, another day. What I can say, though, is that they’re no less beautiful than the Japanese seed beads…and they’re also a reason for me to have gotten the storage I have, so that I can store them loose (and thus, eventually, use them).

I should also note that sometimes size 6° and larger Czech seed beads are sold loose, like Japanese seed beads. I think this is more for convenience and consistency in packaging, than anything. It can discourage use to keep beads on hanks, as well…I know I’m tempted to avoid using them just because they’re so pretty on the hanks, but making something out of them, necessitates cutting them apart.

The below image is of Czech fire-polished round beads. These, in addition to “druks” (round solid glass beads), are essential if you’re going to be doing small-scale bead weaving. I’m pretty sure that the lower row is all 3mm beads; the rest are between 3mm and 6mm (the latter of which, I didn’t even realize I put in here).

IMG_4107w
Fire-polished rounds, from 3mm to 6mm.

Like I’ve mentioned somewhere (…?) else, 5mm fire-polished rounds are somewhat rare, but they do exist. More common are the 6mm fire-polished rounds, a couple of which are in the very top of this photo (the transparent green and transparent “amethyst”, fourth and fifth from the left). The deep blue between the two greens in the top row (third from the left) is a 5mm size.

Sizes commonly go up through 8, 10, and 12mm…but I’ve found the very large sizes much more useful for stringing and other stand-alone applications (e.g. earrings), than for beadweaving.

I mentioned “druks” earlier. It would be normal that most readers here won’t know what I mean by that, so I’ve taken another photo and cropped it to those druks…which are spherical glass beads.

IMG_4109w

The very small beads at the bottom of the above photo are 2mm glass “pearls” — I’m not sure if they are technically categorized as druks. They’re very useful for filling tiny spaces where the thread would otherwise be exposed and vulnerable to cuts and abrasions (which are generally the death of well-loved beadwork). The drawback is that all of them I’ve found are vulnerable to the coating on the outside, peeling.

An alternative is using the very small 2 or 3mm Swarovski crystals, which I’ve used before when playing with patterns from bead magazines. I’ve found that these beads only come in a limited number of colors. The edges of their holes are also sharper, so using these necessitates using a tough thread like FireLine, lest the thread be cut while you’re still weaving the thing!

I haven’t yet looked into Chinese crystal for alternatives, though it’s good to know that Swarovski isn’t the only option available.

To the left of the 2mm glass pearls, are “3mm” druks, actually closer to 2.5mm, on measurement. Above them are 3mm druks; the green and purple iris [iridescent] beads on the upper right, are also 3mm, when they were sold as 4mm. The sky blue matte beads in the center, along with the green glass “pearls”, are actually 4mm.

Anyhow, spherical glass beads which are drilled down the center are called “druks”, and they’re again essential if you’re doing tiny bead-weaving which requires technical precision. The fire-polished rounds (so-called because they’re cut and then allowed to melt again slightly, producing their glossy appearance, if memory serves) are also really nice for texture and contrast.

I’ve been able to use fire-polished rounds down to 3mm with C-Lon standard cord for micromacramé, as well.

I know this blog doesn’t have a lot of followers, so for now I’m just putting this here to remind myself that I don’t have to be on the computer writing and studying, all the time. It’s good to weave in some offline content. It’s also been good to do some image-editing…and step out of academic thought, for a while.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.